Portable Facial Vapour Steamer, India 2020.
Please read the following cautions carefully for Portable Facial Vapour Steamer The required voltage is 220VAC, 50Hz.
Kindly read this manual cautiously before using the Portable Facial Vapour Steamer, otherwise, it can cause fire dangers and electric shocks. put out of reach of children’s and never allow them to use the machine.
Before cleaning turn off the power and unplug the power cord. Put water into the tank before use, and notice the water level frequently. When using, please do not touch got parts or steam to avoid burns. Start Inhaling steam.
Let Portable Facial Vapour Steamer cool down for at least thirty minutes and empty the water box before storing the machine
Please cut the power or unplug the power cord. Please do not place the machine beside the combustibles or next to the stove.
Pull the plug out, and do not pull it by the electric wire. Do not pull it when in use. Please do not add any detergents or chemicals to the machine, otherwise, it will damage the machine and void the warranty. It is also advisable to use distilled or mineral-free water to extend product life.
Notice the potential danger caused by steam splattering in use; please pull the plug when adding water and cleaning the machine Product water operation: Please cut the power and pull the plug before adding water. Please keep the machine on the desk steadily to let it cool down.
Pour water after you have opened the plus valve (take care: the water level must under the maximum water line, otherwise the water level must under the maximum water line, otherwise the water may pour out) , tighten after this action
Connect the power of Portable Facial Vapour Steamer: plug the power cord directly into the power outlet consistent with voltage required.Put the button at the garment or face care position.
After heating for about 1 minute 40 seconds, the steam starts to generate. Then you can enjoy the steam.
Attention: please always keep the nozzle out of a person, pet and plant for the case of steam burns.
When doing facial steam care, please keep a certain distance with the nozzle to avoid face burns. Cut the power:
Turn off the power switch immediately and pull the plug from the power socket after use.
Remove all the accessories first when steaming face, and the amount of water shall be limited within 200ml.
Switch to the “steaming face” mode and sure the machine is stationary. Keep your face at least 20cm away from the outlet, the steam will touch your face so close to the machine that the heated may hurt you.
Reviews
There are no reviews yet.